There is an old saying in our country: "if a worker wants to do something good, his heart will benefit him first."". When you get a satisfactory Jilin, you will not only love, but also to learn to get twice the results; on the other hand, if you are a very poor quality of the finished product, you will lose his passion play. When choosing the guitar, the appearance of beauty should be placed in the second place, first of all have to pay attention to it "sound", from the six aspects to tell you the good and bad guitar recognition knowledge.
Choose the guitar key at 6!
1, with the eyes look carefully at the neck and fingerboard are tall and straight, such as the sound empty at the fingerboard or sink, the neck is middle hump, can not be used by this kind of defect, often destructive appearance, so at the time of purchase, to be especially careful.
First, distance between 2 strings and frets, usually 1.0/1.2mm, spacing and twelfth timbre, 4.5/5/0mm. Higher than the data, not only caused by the string is difficult, and will lead to "out of tune", this kind of guitar can please experienced guitar teacher, and then use string distance adjustment.
A panel of 3 copper, timbre, in geometry, broad, flat round for the top, a flat tone is the knife type, will not only damage the strings, and prevent the fingers of the left hand on the string and change the contusion glide speed. This type of guitar is unfit for use.
Each part of body 4, tapping resonance, such as a cloudy hoarse murmur, that a part of the cracking or debonding phenomenon. ,
5, the string to the standard pitch, has found the axis rotation failure, and try to check whether there is a bad product.
6, playing the scale and chord, to listen to the debate whether it meets the requirements and the volume between intonation and tone, the string sounds are balanced, if feel comfortable.