Daily maintenance of electric guitar (including wire products to rust, removal of metal oxide, fingerboard maintenance etc.)
来源:吉他中国
|
作者:yongchun
|
发布时间: 2017-10-10
|
3396 次浏览
|
分享到:
The guitar is a kind of musical instrument, often played rusty silk goods and can slow down the strings, but the metal placed in the air, it is easy to be oxidized, so for a long time, product wire rust, metal oxidation, rust stains can hardly be avoided. Playing with a clean, shiny guitar will no doubt make you feel better.
The guitar is a kind of musical instrument, often played rusty silk goods and can slow down the strings, but the metal placed in the air, it is easy to be oxidized, so for a long time, product wire rust, metal oxidation, rust stains can hardly be avoided. Playing with a clean, shiny guitar will no doubt make you feel better.
First, the quality of silk rust and metal parts to remove stains:
First need to release the string, the string can be removed by EPI black beauty as an example, loosen the strings, then the string from the Qin code above removed, remove the bridge, and then continue to loose can push back the bridge, the bridge will be removed so far, then the string and connected with the bridge neatly on the piano one side, be careful not to scratch the body. This can be the first to metal scouring, is used specifically for Guitar metal parts and Alice POLISH goods silk scouring suit, pour a little on the cloth, wipe the metal surface of the device, the oxidation is not too bad a few on the bright, long oxidation time, rubbing will be very effective the. Then the same method to wipe wire, do not worry about rust remover to rub it, because this is a volatile substance similar to kerosene diesel like, a little volatile himself.
Two, clean up the fingerboard.
Rosewood or ebony (if not maple) you can use the Dunlop produced the fingerboard of lemon oil, very good use. It generally around 1 hours will be able to absorb the oil absorbed, then the fingerboard will certainly have the remaining lemon oil, you will each fingerboard and then wipe it again with b.i.d wipe cloth, lemon oil, wipe off the excess, but also dirty things on the fretboard dissolved in lemon oil rub together. Maple see another post, say with olive oil can, this is to be verified, I have not used.
Three. Clean the body and string maintenance
When the shield is removed, the body will be positive, especially after the first quarter is not easy to rub the place to use b.i.d wipe cloth or chamois wipe, no water. Spray a little Cabernet Franc or prefox, specifically for the guitar body wax, you can, the two are essentially the same, personally recommend prefox body wax. There are sets with Qin cloth, the price is cheaper than the Cabernet Franc, but also more professional. Clean up the front corners, Gou Gou kankam, Qin Qin code will install back, strung. At this time, wipe and wipe the front, because the installation will leave some fingerprints. Install the guard board and wax the whole. Then place it for a while. You can put it on a piano stand or inside a piano case. Then, use the string pen, the black one to wipe the strings, rust, and then wipe the strings with the white one. Then the whole maintenance process was completed. Note that cleaning the body as little as possible or no water rub, after all, is wood, afraid of moisture. Wipe lightly, or scratch easily.
Four, piano placement
Often play the piano on the shelves, but it is best to have a music box, dustproof effect is certainly better BICEN frame. Put some desiccant in the box to deal with the wet weather in the South and the humid summer in the north. For a period of time, it is recommended that the dust collector be removed by vacuum cleaner. Taobao search, 200 within the general can get, and the quality is very good.
